ProFlex SPES is a single-part, standard setting, flexible adhesive for wall and floor tiles. Specially formulated with extended workability, enhanced adhesion and flexibility, ProFlex SPES is ideal for areas subject to slight movement or vibration. In accordance with EN 12004 ProFlex SPES has been classified as an S1 adhesive, with a high level of deformation for greater tolerance to movement.
ProFlex SPES is a polymer modified adhesive, providing an enhanced performance, with a higher bond strength including installations subject to moisture. Providing fixers with an extended pot-life and the ability to take light foot traffic within 18 hours of installation depending upon temperature and substrate.

Areas of use:
Wall tile installations, both internal and external.
Floor tile installations, both internal and external.
Wet rooms, both domestic and commercial.
Domestic showers with a standard shower tray.
Commercial showers.
Swimming pools.
Above Electric matting underfloor heating.
Above piped water underfloor heating.
Conservatories.

Suitable Tiles.
Ceramic
Porcelain
Slate
Glass
Limestone
Travertine
Marble
Mosaics
Granite
Terracotta
Quarry
Quartz
Brick Slips

Suitable Substrates.
Concrete
Anhydrite/calcium sulphate/gypsum-based screeds
Sand & cement screed
Sand & cement render
Flooring grade asphalt
Plywood overlay (15mm min)
Cement-faced fibre boards
Tile backer boards
Firm & stable plaster
Existing Tiled Surfaces.
Plasterboard
Hard vinyl tiles
Concrete brick & block