Kelmore's MoreBond Standard C2 is a polymer modified, flexible, standard setting, cementitious tile adhesive for walls and floors. This smooth, slump-free adhesive has enhanced adhesion ensuring numerous types of tiles, such as porcelain, ceramic and most natural stone can be confidently fixed to a wide range of backgrounds. Allowing bed depths up to 15mm, MoreBond Standard C2 has a long pot life of 4 hours and an excellent open time of 40 minutes, whilst still being set and ready for grouting after 16 hours. This adhesive is suitable for interior and exterior use, as well as in wet areas, including swimming pools. MoreBond Standard C2 has been manufactured to the highest of standards using unique technologies, extensive knowledge, and outstanding raw materials. When compared to the production of traditional cementitious adhesives, this results in a significant reduction in CO2 emissions.
Suitable Substrates.
Read more
Tile Backer Boards
Internal or External.
Wet or Dry Areas.
Sand & Cement Screeds
Above Electric Underfloor Heating. (On Solid Bases).
Above Piped Water Underfloor Heating. (Screeds).
Plasterboard
Plaster
Flooring Grade Asphalt
Existing Hard Vinyl Tiles
Existing Tiled Surfaces.
Porcelain & Natural Stone Tiles
Epoxy DPM
Concrete Brick/Block
Concrete
Sand & Cement Render
Calcium Sulphate / Anhydrite Screeds (inc. Heated).
Domestic or Commercial.
Suitable Tiles.
Porcelain.
Ceramic.
Natural Stone. (Non-Moisture Sensitive).
Terrazzo.
Brick Slips.
